Rheem 96v series Installation Instructions Manual page 30

Checklist:
Review:
___
• VERIFY ALL HOSES ARE SECURE AND FULLY SEATED.
___
• CONFIRM THAT ALL HOSES ARE FREE OF KINKS.
___
• CONFIRM ALL HOSES AND OTHER DRAIN PARTS HAVE A
SLOPE IN DIRECTION OF WATER FLOW.
___
• BOTH WORM DRIVES ON THE HOSE CLAMPS OF THE FLUE TRANSITION
MUST BE LOCATED ON THE TOP OF THE COUPLING. SEE LOCATION
DETAIL IN THE GENERAL CONVERSION INSTRUCTIONS AT THE
BEGINNING OF THIS SECTION.
___
• ALL CLAMPS AND COUPLINGS ARE TIGHTENED
___
• ALL DRAIN PORTS ARE PLUGGED.
___
• UNIT HAS FORWARD PITCH.
___
• HEAT TAPE INSTALLED(IF REQUIRED)
Notes:
30
ST-A1194-32-01