Carrier 50TJ016-028 Installation, Start-Up And Service Instructions Manual page 3

NOTE: For preassembled horizontal adapter part no. CRRFCURB013A00,
the accessory kit includes a factory-designed, regain, high-static, transition
duct. For horizontal curb part no. CRRFCURB012A00, a field-supplied tran-
sition duct is required.
Fig. 2 — Horizontal Adapter and Roof Curb Details
MAXIMUM
UNIT
SHIPPING WEIGHT
50TJ
Lb Kg
016 2170 984
024 2350 1066
028 2500 1134
NOTES:
1. Dimensions in ( ) are in millimeters.
2. Refer to Fig. 4 and 5 for unit operating weights.
3. Remove boards at ends of unit and runners prior to rigging.
4. Rig by inserting hooks into unit base rails as shown. Use corner
post from packaging to protect coil from damage. Use bumper
boards for spreader bars.
5. Weights do not include optional EconoMi$er. See Fig. 4 and 5 for
EconoMi$er weight. See Tables 1A and 1B for MoistureMiser
weight.
6. Weights given are for aluminum evaporator and condenser coil
plate fins.
All panels must be in place when rigging.
Fig. 3 — Rigging Details
DIMENSIONS
A B
Ft-in. mm Ft-in. mm
1
6-11 / 2121 4-0 1219
2
1
6-11 / 2121 3-7 1092
2
1
6-11 / 2121 3-5 1041
2
3