Carrier 50TJ016-028 Installation, Start-Up And Service Instructions Manual page 5

ECONOMI$ER WEIGHT
UNIT
50TJ
lb
024 80
028 80
*Weights are for unit only (aluminum plate fins) and do not include options or crating.
CORNER WEIGHT*
A B
kg Lb Kg Lb Kg
36.3 423 190 412 185
36.3 441 200 416 189
Fig. 5 — Base Unit Dimensions, 50TJ024,028
LEGEND
KO — Knockout
NOTES:
1. Refer to print for roof curb accessory dimensions.
2. Dimensions in ( ) are in millimeters.
3.
4.
5. Ductwork to be attached to accessory roof curb
only.
6. Minimum clearance:
a. Rear: 7'-0" (2134) for coil removal. This di-
b. Left side: 4'-0" (1219) for proper condenser
c. Front: 4'-0" (1219) for control box access.
d. Right side: 4'-0" (1219) for proper operation of
e. Top: 6'-0" (1829) to assure proper condenser
f. Local codes or jurisdiction may prevail.
7. With the exception of clearance for the condenser
coil and the damper/power exhaust as stated in
note no. 5, a removable fence or barricade
requires no clearance.
8. Dimensions are from outside of corner post. Allow
0'-
9. See drawing 50TJ500352 for service option
details.
10. A 90 degree elbow must be installed on the
supply ductwork below the unit discharge for
units equipped with electric heaters.
DIMENSIONS
C D A
Lb Kg Lb Kg Ft-in.
490 220 475 213 3-3
533 242 560 254 3-1
5
Center of Gravity.
Direction of airflow.
mension can be reduced to 4'-0" (1219) if con-
ditions permit coil removal from the top.
coil airflow.
damper and power exhaust if so equipped.
fan operation.
" (8) on each side for top cover drip edge.
5
/
16
B
mm Ft-in. mm
991 3-7 1092
940 3-6 1067