Mastering Eawmosaic; Introduction; What Is Eawmosaic; Why Use Eawmosaic - EAW Radius RSX series Owner's Manual

Table of Contents

Mastering EAWmosaic

While much of the control is available on the full-color screen and controller on the rear panel of each RADIUS Series speaker, the real

power happens when using the EAWmosaic application. The EAW EAWmosaic app helps users set up and configure their RADIUS-

based sound systems so they sound as good as possible. It does this through discovery, configuration, control, monitoring and venue

optimization via Wi-Fi.

With an extremely approachable design for engineers and system techs of all levels, EAWmosaic offers powerful design, prediction

and system optimization. This single, comprehensive app solution delivers intuitive and powerful control over your RADIUS system.

EAWmosaic allows one to virtually model, predict and evaluate a loudspeaker system's performance for any user-defined venue. It will

also predict direct SPL levels and frequency response throughout this virtual venue. Most importantly, it allows you to model a design

that is safe for your application.

EAWmosaic should be installed and utilized for a multitude of reasons.

First, it is predictive software that helps predetermine any issues that may arise, including safety, weight, angle, flybar and more.

EAWmosaic also determines coverage. Are the SPL and frequency response as desired everywhere in the venue? Should three or four

arrays be used? How many subwoofers should be employed in this particular system? Should the subwoofer(s) be flown or placed on

the floor? What voicing mode is best for this system? Find out the answers to these questions, and more, using this app.

It is a great tool for pre-sales, as well. Customers will be able to see the final setup prior to any purchase. Therefore, realistic

expectations have been set for all interested parties which results in a better relationship between the buyer and seller.

Finally, it is a great educational tool with a great price...FREE!

For complete instructions about operating EAWmosaic, please read the EAWmosaic Help File. EAWmosaic should always

be used to model any new installations to ensure that the design is safe.

You will have to review the EAWmosaic Help File in order to really dig in and find out how it works, but in a nutshell EAWmosaic works

by helping you improve the sound of your rig. Significant features such as loudspeaker discovery, grouping, control, monitoring and

venue optimization are provided via a Wi-Fi connected iPad or offline in advance of a gig.

Additionally, when a Dante-enabled mixer (or other Dante source) is connected to RADIUS loudspeakers via the Dante network, you're

able to route Dante signals from the network directly to the RADIUS speakers.

Together these features help you decide which speakers to use for a particular venue, where to place them in the venue and how to

configure them for the best results possible. It lets you control them live and make changes on site to get the best sounding rig as

possible. And if there is a problem with a speaker, it helps diagnose and work around the issue.

Table of Contents