EAW Radius RSX series Owner's Manual page 25

•
Right - Automatic Array Detection indicators
o
Up and Down arrows illuminate to indicate that the RSX208L is part of an array and that another RSX208L
or RSX12 is present above or below it.
o
White indicates that the RSX208L is part of an array that is ready to be optimized.
o
Green indicates that the RSX208L is part of an array that is currently optimized.
o
Amber indicates that the array was previously optimized but that something in the array has changed
(eg. a splay angle has been altered, a speaker has been added to or removed from the array, etc).
o
is detected above or below it.
Input is indicated as Analog unless a Dante source is assigned to the loudspeaker.
Voicing indicates the currently selected voicing profile.
Level shows any gain adjustment from nominal that has been applied by the user.
Input level is indicated via meter on the right of the display, with clip indicator above it. The meter range is -60 to 0 dBFS with
a color gradient from green to red. The input clip indicator is displayed when the input signal exceeds 0dBFS.
indicates that the loudspeaker was previously optimized, but that currently no other RSX208L
25