Delay - EAW Radius RSX series Owner's Manual

Table of Contents

Blue

The Blue voicing provides a more significant 2 dB low-frequency boost, coupled with the same high-frequency roll-off

as Grey, but with 2 dB more mid-frequency attenuation from 700 Hz to 8,000 Hz.

This voicing is most suitable for high-SPL performances with significant upper-mid content. The more extensive mid- and

high-frequency attenuation is sometimes useful to combat fatigue with midrange-heavy instruments, as the ear is most

sensitive to this range of frequencies.

Sapphire

The Sapphire voicing combines the low-frequency boost and high-frequency attenuation of Blue, but with the addition of

additional very high-frequency emphasis above 10 kHz for additional "air" and clarity. This voicing is especially suitable for

high-quality audio playback (without the need for supplemental equalization), and was the result of feedback from a number

of touring audio engineers.

User

One voicing profile is reserved for the user to define and save for later recall. Using the EAW Mosaic application for iOS, the

user can customize the voicing and store it to this profile. Later, loading the User voicing will recall the stored voicing profile.

This profile remains in the loudspeaker's memory until a factory reset is performed or until it is altered by a user via

EAWmosaic.

Rotating the DSP Navigation / Edit Wheel changes the selected voicing profile in real time. Pressing the DSP Navigation / Edit Wheel,

or after 5 seconds have passed with no press or turn of the DSP Navigation / Edit Wheel, the Main Menu is displayed.

Delay

Selecting Delay allows the user to adjust the loudspeaker's alignment delay in 1ms increments ranging from 0 to 150 ms in 0.1 ms

increments between 0 and 10 ms and in 1 ms increments above 10 ms. For reference, the equivalent distance is displayed in meters

and in feet. Rotating the DSP Navigation / Edit Wheel changes the delay value, and pressing it returns to the Main Menu. After 5

seconds have passed with no change to the Delay parameter the Home Screen is displayed.

Table of Contents