Table of Contents
Advertisement
The wiring convention is as follows:
Pin 1: Shield
Pin 2: + / Hot
Pin 3: – / Cold
*Typically, a RADIUS array or full-range loudspeaker is connected to the VARIABLE HPF output of a RADIUS subwoofer to "split" the
work. The subwoofer handles all of the low frequencies and the array | loudspeaker handles the rest. As a result, it is more efficient
and a bit louder.
Dante A / B
Digital Audio
These Dante ports are for connecting one RADIUS to another RADIUS (or another Dante-enabled device)
via CAT5 (or better) Ethernet cable. This features dual Dante ports for daisy chaining.
DSP Navigation / Edit Wheel
Rotate (or push-click) the encoder to open settings, navigate the user interface and edit parameters
and select values.
This endless rotary wheel allows you to navigate the user interface, edit sections of RADIUS and navigate within
screens to select sub-menus, pages and parameters, as well as select values during editing.
LCD UI Display
The LCD UI Display is one of the most vital features of RADIUS as it displays all of the menu navigation information.
When RADIUS is powered on, it will load up the last state it was in when powered off.
Front Panel LED
The front panel LED illuminates when the AC Mains In of RADIUS is plugged into a suitable AC power supply. The color of the LED,
however, is dependent on the current state of the RADIUS.
These LEDs vary slightly depending on whether EAWmosaic is being used or not. In this case, we're looking at the
hardware only, so NO EAWmosaic. See below:
MODE
BOOT
OFF
OFF
As seen above, the front panel LED only illuminates in 'Advertise' or 'Identify'.
Advertise is engaged when a speaker is selected in the discovery shelf in EAWmosaic. This enables you to see the speaker that's
been selected, identify it and drag it into the appropriate group. The amber color of the LED makes it clear that it is not yet in the
rig and still under EAWmosaic control. Once identified, the LED will turn white.
This is a manual process that can only occur when in setup mode, NOT show mode.
An overview of EAWmosaic is explained later in this manual. There is even greater detail in the
Help File.
NORMAL
LIMITING
OFF
OFF
FAULT
ADVERTISE
OFF
AMBER
IDENTIFY
WHITE
EAWmosaic
Advertisement
Table of Contents
