Voicing - EAW Radius RSX series Owner's Manual

Upon completion of Automatic Optimization, settings for all RSX208L modules in the array are adjusted for optimum performance
across the specified coverage area. Equalization adjustments are made to compensate for low frequency coupling depending upon
the number of RSX208L modules in the array. Additional EQ is applied to compensate for high frequency energy loss between each
RSX208L module and its defined coverage area.
Automatic Optimization functions independently for each discrete array employed in a multi-array system. Generally for a stereo line
array system, the optimization sequence will be performed on both sides of the system utilizing the same Audience and Array Height
settings per array. For more complex venues, differing settings can be utilized but care must be taken not to overlap coverage areas
from these arrays.

Voicing

System optimization is further streamlined through the use of four pre-defined voicing profiles based
upon feedback compiled from key touring and installation contacts. These provide a variety of tonal
starting points depending on the musical style and user preference. In addition, one user-defined
profile is available for selection, and can be configured using the EAW Mosaic application for iOS.
Below, the target response and a brief explanation are provided for each voicing.
White
White represents a nominally flat voicing. It should be used when the most neutral,
uncolored system response is desired.
Grey
Compared to White, the Grey voicing provides a 1 dB low-frequency boost with a gradual high-frequency roll-off,
reaching 4 dB at 10 kHz.
21