Gamma 5003 Owner's Manual page 9

MOUNTING THE FRAME
BRIDGE
Racquet Hold Down Clamp Operation
With the lever in the up position, insert the
racquet hold down clamp pin into the hole in the
center of the mounting stand. Lower the hold
down clamp until it just makes contact with the
surface of the racquet. Using slight palm pressure
on the hold down clamp depress the racquet
hold down lever completely to secure the racquet
frame to the stand.
Special Throat Mounting
For racquets with a bridge that is thinner
than the rest of the frame or are tapered
from head to throat you may need to
mount the racquet with the shafts of the
racquet supported by the white support
pads as pictured.
9