Lotus Service Notes
Throttle Actuator Control Module Performance
P2108
Throttle actuator control module performance
Monitor:
• Continuous
Enable Criteria:
• Engine running
Disable Criteria:
• None
Potential failure modes:
• ECU internal failure
• Short circuit to throttle actuator
Pedal Position Sensor 'D' Circuit Low
P2122
Pedal position sensor 'D' circuit low
Description
Two potentiometers are built into the throttle pedal unit in order to provide a throttle demand signal to the ECU.
Note that the potentiometers operate on 5 volts.
Enable Criteria:
• None
Disable Criteria:
• None
Potential failure modes:
• Signal short circuit (< 0.283 V)
• Reference voltage open circuit
• Reference voltage short to ground
• Sensor failure
Notes: A maximum throttle opening of 15% may be imposed due to this single code. In the case of multiple
codes, a mechanically sprung 7% opening may be applied.
Page 72
2009/02
Section EMR