Lotus Service Notes
Throttle Actuator Control System – Forced Limited Power
P2106
Throttle actuator control system – forced limited power
Description
If a problem is detected which could result in engine speed control difficulties, the ECU will limit throttle opening
to a maximum of 15%.
Monitor:
• Continuous
Enable Criteria:
• Engine running
Disable Criteria:
• None
Potential failure modes:
• Electronic throttle fault
Note: This code indicates action taken by the ECU, and will always be accompanied by another code which
has caused this action.
Throttle Actuator Control Module Processor
P2107
Throttle actuator control module processor
Description
The ECU contains two processors dedicated to the throttle pedal and throttle valve potentiometers.
Monitor:
• Continuous
Enable Criteria:
• Engine running
Disable Criteria:
• None
Potential failure modes:
• ECU internal fault
• Incorrect ECU programming
2009/02
Section EMR
Page 71