Example For Configuring Ipv6 Neighbor Discovery - Huawei AR150 series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
# On Router A, ping the global unicast IPv6 address of Router B.
[RouterA] ping ipv6 3001::2
PING 3001::2 : 56
--- 3001::2 ping statistics ---
----End
Configuration Files
l
l

3.9.2 Example for Configuring IPv6 Neighbor Discovery

This section describes how to configure IPv6 neighbor discovery.
Networking Requirements
As shown in
local address for the GE interfaces and enable the routers to send RA messages.
Issue 02 (2012-03-30)
FF02::1:FF9B:6D3B
data bytes, press CTRL_C to break
Reply from 3001::2
bytes=56 Sequence=1 hop limit=64
Reply from 3001::2
bytes=56 Sequence=2 hop limit=64
Reply from 3001::2
bytes=56 Sequence=3 hop limit=64
Reply from 3001::2
bytes=56 Sequence=4 hop limit=64
Reply from 3001::2
bytes=56 Sequence=5 hop limit=64
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/2/2 ms
Configuration file of Router A
#
sysname RouterA
#
ipv6
#
interface ethernet1/0/0
ipv6 enable
ipv6 address 3001::1/64
#
return
Configuration file of Router B
#
sysname RouterB
#
ipv6
#
interface ethernet1/0/0
ipv6 enable
ipv6 address 3001::2/64
#
return
Figure 3-2, two routers are connected through GE interfaces. Configure IPv6 link-
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
time = 2 ms
time = 2 ms
time = 2 ms
time = 2 ms
time = 2 ms
3 Basic IPv6 Configuration
78