Example For Configuring Ipv6 Static Routes - Huawei Quidway S2700 series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - IP Routing

1.5.2 Example for Configuring IPv6 Static Routes

Networking Requirements
As shown in
every two hosts or Switches be interconnected through IPv6 static routes.
Figure 1-2 Networking diagram for configuring IPv6 static routes
Vlanif100
1::1/64
Configuration Roadmap
The configuration roadmap is as follows:
1.
Issue 01 (2011-07-15)
vlan batch 20 50
#
interface Vlanif20
ip address 1.1.4.6 255.255.255.252
#
interface Vlanif40
ip address 1.1.3.1 255.255.255.0
#
interface Ethernet0/0/1
port link-type trunk
port trunk allow-pass vlan 20
#
interface Ethernet0/0/2
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
ip route-static 0.0.0.0 0.0.0.0 1.1.4.5
#
return
Figure 1-2, the mask length of all the IPv6 addresses is 64 bits. It is required that
Vlanif1
4::1/64
Switch B
Switch A
Vlanif1
4::2/64
PC1
1::2/64
Assign an IPv6 address on each Switch to make the network routable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PC2
2::2/64
Vlanif100
2::1/64
Vlanif2
5::1/64
Switch C
Vlanif2
5::2/64
Vlanif100
3::1/64
PC3
3::2/64
1 IP Static Route Configuration
11