Configuring Routed Proxy Arp; Establishing The Configuration Task - Huawei AR150 series Configuration Manual

Hide thumbs Also See for AR150 series:
Table of Contents

Advertisement

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service
Procedure
l
l
l
l
l
----End
Example
# Run the display arp interface command, and you can view ARP entries on Eth1/0/0.
<Huawei> display arp interface ethernet 1/0/0
IP ADDRESS
------------------------------------------------------------------------------
192.168.1.11
192.168.1.1
------------------------------------------------------------------------------
Total:2
# Display all the dynamic ARP entries.
<Huawei> display arp dynamic
IP ADDRESS
------------------------------------------------------------------------------
10.137.217.210
10.137.216.1
10.137.217.208
10.2.2.1
10.6.3.34
192.168.20.1
10.0.0.1
------------------------------------------------------------------------------
Total:7

1.5 Configuring Routed Proxy ARP

Routed proxy ARP implements communication between devices on the same network segment
but on different physical networks.

1.5.1 Establishing the Configuration Task

Before configuring routed proxy ARP, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the data required for the configuration. This
will help you complete the configuration task quickly and accurately.
Issue 02 (2012-03-30)
Run the display arp [ all ] command to check all ARP entries, including static ARP entries
and dynamic ARP entries.
Run the display arp interface interface-type interface-number [ vid vlan-id [ cevid cevlan-
id ] ] command to check ARP entries on the specified interface.
Run the display arp network net-number net-mask [ dynamic | static ] command to check
ARP entries on the specified network segment.
Run the display arp dynamic command to check dynamic ARP entries.
Run the display arp statistics { all | interface interface-type interface-number } command
to check statistics on ARP entries on the AR150/200 or the specified interface.
MAC ADDRESS
0000-0a41-0201
0000-0a41-0200
Dynamic:1
MAC ADDRESS
00e0-fc01-0203
0025-9e38-a09e
00e0-fc01-0205
00e0-fc99-9999
00e0-fc01-0204
00e0-fc99-9999
00e0-fc99-9999
Dynamic:2
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
EXPIRE(M) TYPE
VLAN/CEVLAN PVC
I -
15
D-6
Static:0
Interface:1
EXPIRE(M) TYPE
VLAN/CEVLAN PVC
I -
20
D-0
16
D-0
I -
I -
I -
I -
Static:0
Interface:5
1 ARP Configuration
INTERFACE
VPN-INSTANCE
Eth1/0/0
r1
Eth1/0/0
r1
INTERFACE
VPN-INSTANCE
Eth1/0/0
Eth1/0/0
Eth1/0/0
Eth-Trunk0
Eth2/0/0.1
Vlanif100
Vlanif200
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar200 seriesAr3200 series

Table of Contents