Panasonic CF-35 Operating Instructions Manual page 19

When you want to prevent theft of or damage to data by using a floppy disk
When you do not want your Supervisor Setup changed without permission
You may choose to protect the data on your computer from being accessed illegally or over-
written accidentally by using a floppy disk. You can also set your computer to be unbootable
from a floppy disk.
NOTE
To prevent the use of floppy disks altogether, you may also choose to remove the floppy
disk drive ( page 22).
Preventing the use of a floppy disk
Even when one tries to access a
floppy disk,
Procedure
1
Run the Setup Utility
2
Using and
3
Using and
FDD] or [CDD
CAUTION
When changing to [HDD
continue read/write operation from a floppy disk and to use the hard disk drive or
CD-ROM to start, press
4
Using the and
with then press
5
Close the Setup Utility
Set the Supervisor Password. After it has been set, no changes can be made to the Supervisor
settings unless the password is entered.
When the supervisor password is set
In the Setup Utility (
if is displayed,
Input the correct supervisor password and press
When the supervisor password is incorrect or when the
user password is entered, (Or, even when the correct su-
pervisor password is entered. (
NOTE
You may wish to protect the User Password (
( page 36)
, select [Supervisor Setup] then press
, select [Boot Up Drive] then set either [HDD
FDD HDD] with
FDD] or [CDD
and go to step 5 .
, select [Floppy Operation], set [Disable]
( page 36)
page 36),
page 31))
(There are cases in which the Supervisor Setup does
not appear on the main screen (
page 20).
This error message is displayed.
FDD HDD] setting, to
Supervisor Setup
,
May be
Opened
Supervisor Setup
Can not be
Opened
page 36)).
19