Setup Utility - Panasonic CF-35 Operating Instructions Manual

Setup Utility

Running the Setup Utility
Program Completion
• Hibernation settings (
• Power Management settings (
• Security Settings ( page 17)
• Add-ons/Peripherals Settings (
After you have completed all settings, you may
exit the Setup Utility program.
Closing the Program
36
To run the Setup Utility, you
need to restart your computer.
NOTE
The Setup Utility will not be run if
In this case, you need to restart your computer again.
If is displayed, enter your password.
If both the [User Password] and [Supervisor Password] have been set, after entering the
User Password, [Supervisor Setup] will not be displayed on the main screen.
To display the [Supervisor Setup]:
1 Use
2 Restart the computer and press
3 When
For more details, on-line help is available; press
<Main Screen>
Setup Utility
•System Setup
•Power Management
•Super visor Setup
Save Settings
Restore Settings
Load Default Settings (PnP)
Load Default Settings (Non-PnP)
Exit Setup
page 11)
page 13)
NOTE
page 22)
Key Operations
Exit Setup
Settings w ere changed.
Do you want to save them?
Yes, save and exit the Setup Utility.
No, exit the Setup Utility without saving.
No, return to the Setup Utility.
(The display may be different if no changes to the settings are made.)
Upon seeing
this message
is not pressed soon after the computer restarts.
+ Power Switch to turn your computer off.
is displayed, enter the Supervisor Password.
Return to the state existing at the time of Setup Utility
startup, or to the settings saved with [Save Settings].
Set default settings.
• (PnP) denotes "for Windows 95".
• (Non-PnP) denotes "for other than Windows 95".
• When the Supervisor Password has been set, input of
the password is necessary.
:
To display the correspond-
ing "help" file.
:
To make a selection.
:
To display previous screen
(To exit the program at the
main screen).
NOTE
If the User Password has been set, the password
must be entered before Windows can start.
Press F1 for Setup
when [Press F1 for Setup] is displayed.
.
:
To move among the items.
:
To move among the values of
each item.
:
To return to the setting before a
change.
:
To set the default values.
press