Computing On The Road - Panasonic CF-35 Operating Instructions Manual

Cf-35 series personal computer
Table of Contents

Advertisement

Computing On the Road

Conserving Power
12
One of the main features of notebook-type computers is that you have the power of computing
away from your home or office. In the following, information is provided on how to maximize
use of the battery pack which is necessary for such computing.
Four Important Points
1
POINT
Be sure to charge your battery before and after use.
2
POINT
To get the maximum use of your battery, set the power
management mode.
3
POINT
Check to see that you have your AC adapter with you before
leaving your home or office.
Purchasing an extra battery (CF-VZS351) or the optional battery charger
(CF-VCB251A) is highly recommended.
4
POINT
Always watch your battery level!
Things to Remember
Leave your computer off when it is not in use
Adjust the brightness
Before stepping away from your computer, press
put your computer in the standby mode
The standby mode helps you conserve power by cutting off power to the hard disk
drive's motor and LCD. To resume, you may press any key.
In the power management mode, the setting of [Advanced] is
recommended
With the Setup Utility, you can set the [Advanced] mode. This mode allows you to
maximize power save regardless of whether you are using only the battery pack or the
AC adapter.
Setting the hibernation timeout
The hibernation function (
ting off power when the computer is idle or there is no access to individual devices for 4
or 16 minutes. If [Advanced] or [Standard (Battery/AC adapter)] is selected for [Power
Saving], the hibernation timeout function will go into effect for both the battery pack
and the AC adapter. If, however, [Standard (Battery)] or [OFF] is selected for [Power
Saving], it will go into effect only during operation by the battery. The standby timeout
function is automatically set when [Advanced] or [Standard] is set. Note that the standby
timeout precedes the hibernation timeout.
It should be noted that for some applications, the hibernation timeout will not work
properly.
NOTE
If you plan to use only the battery pack or set the power management, it is necessary to
check
[Allow Windows to manage power use on this computer] in [Start] - [Set-
tings] - [Control Panel] - [Power]. If no check is added, the hibernation timeout will
not occur.
with
(dark)
(
page 13)
(
page 10) allows you to save power by automatically cut-
(
page 10)
+
(
page 39)
+
page 13)
to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents