Elevated Hearth Systems - Majestic DBDV36IN Installation Manual

Removal of Finishing Strips
NOTICE: Remove fi nishing strips before fi ring appliance.
Remove glass frame assembly to access fi nishing strip
screws.
Figure 10.9 Removing Finishing Strips.
D. Elevated Hearth Systems
Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various
dimensions. Some hearth systems will elevate the appliance off the fl oor at a given dimension. For example, if appliance
will be used with a Kenwood Cabinet with Base, the appliance will be elevated 9-1/4 in. The 9-1/4 in. elevation will also
have to be added to the following: Wall penetration referenced in Figure 5.3 (Wall penetration) and Rough Opening Height
(header height) referenced in Figure 3.4. Note: Finished fl oor thickness should also be considered when determining in-
stallation dimensions.
MODEL
KENWOOD CABINET
KENWOOD CABINET W/ BASE
KENWOOD CORNER CABINET
DBDV36PLATI
KENWOOD CORNER CABINET W/ BASE
KENWOOD MANTEL
KENWOOD MANTEL W/ BASE
KENWOOD MANTEL
DBDV42PLATI
KENWOOD MANTEL W/ BASE
Note 1. Add dimensions to Wall Penetration (Figure 5.3) and Rough Opening Height (Figure 3.4).
Note 2. Verify Marble Cut Lengths on site prior to cutting.
Note 3. Dimensions assume use of a 3/4 in. Hearth Pad.
Majestic • DBDV36IN, DBDV36IL, DBDV42IN, DBDV42IL Installation Manual • 2397-980 Rev. B • 5/16
DESCRIPTION PART #
KDC48DBP
KDC48DBP W/ HTKDC48DBP
KDA48DBP
KDA48DBP W/ HTKDA48DBP
AFKDMPB
AFKDMPB W/ HTKDMPB
AFKDMPC
AFKDMPC W/ HTKDMPC
FINISHING STRIPS REMOVED
ELEVATED APPLIANCE MARBLE LEG CUT
DIMENSION
See Note 1
0
9-1/4 in.
0
9-1/4 in.
0 (See Note 3)
9-1/4 in.
0 (See Note 3)
9-1/4 in.
LENGTH
See Note 2
33 in.
33 in.
33 in.
33 in.
33 in.
33 in.
32-7/8 in.
32-7/8 in.
53