Replacing Double Feed Prevention Roller - Panasonic KV-S7097 Operating Manual

■ Replacing Double Feed Prevention Roller

1
Turn the power off.
2
Push the ADF door release to open the
ADF door.
3
Open the double feed prevention
conveyor in the direction of the arrow
shown in the figure by using the indent
on the back side.
4
Remove the double feed prevention
roller, pulling up the shaft in the
direction of the arrow.
5
Take out
prevention roller in the optional roller
exchange kit (KV-SS015).
the new double
Replacing Consumable Roller Modules
ADF door release
Double feed
prevention roller
feed
ADF door
Indent
Double feed
prevention conveyor
45