Operation Panel - Panasonic KV-S7097 Operating Manual

Component Identification

■ Operation Panel

1
Power button
Press the power button for more than one second to turn the unit off.
2
LED (Red)
Lights when an error occurs.
3
LED (Green)
'
Shows the scanner s status.
4
7-segment LED
If you are using the scanner with Image Capture Plus, you can perform a push scan using the 7-segment LED.
A registered job number is displayed on the 7-segment LED. Use the cursor button (
5
Cursor button
6
Skip button
If you press this button after a double feed or a dog-eared document is detected and scanning has been paused,
the document (or documents) detected as a double feed or the dog-eared document will be scanned, and then
ejected from the scanner. Scanning will continue after the document is scanned and ejected.
7
Start/Stop button
•
During scanning, pushing this button stops scanning.
•
If you press this button after a double feed or a dog-eared document is detected and scanning has been
paused, the document (or documents) detected as a double feed or a dog-eared document will be ejected from
the scanner without being scanned. Scanning will stop.
•
If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts scanning.
For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIS help.
10
1 2 3 4 5
7
6
5
) to select a job.