Panasonic KV-S7097 Operating Manual page 36

Cleaning the Unit
5
Use the roller cleaning paper (KV-SS03)
to remove the dirt from the surface of
the double feed prevention roller.
Note
•
When wiping off the dirt on the roller sur-
faces, hold the rollers to prevent them
from rotating, and wipe the roller all the
way around them proceeding from one
end to the other in the direction of the
arrows shown in the figure.
6
Close the double feed prevention
conveyor in the direction of the arrow
shown in the figure.
7
Close the ADF door.
•
When you close the ADF door, close it
securely until the door is locked.
Note
•
If roller cleaning notifications via the After Clean
Roller Counter are enabled, reset the After Clean
Roller Counter in User Utility to 0 after turning ON
the unit's power. For details, refer to the User Util-
ity help.
36
Double feed prevention roller
Double feed Double feed
prevention roller prevention conveyor
ADF door