Final Work; Coding Bsi Central Switching Unit - Webasto thermo top e Installation Instructions Manual

Final Work

WARNING!
Mount removed parts in reverse order.
Check all hoses, clamps and all electrical connections for firm seating.
Secure all loose cables using cable ties.
Only use manufacturer-approved coolant.
Spray heater unit components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect the battery.
- Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
- Set the digital timer.
- Check the proper operation of the additional heater, see the operating instructions/installation in-
structions.
- Attach the „Switch off additional heater before refueling" sticker near the filler neck

Coding BSI Central switching unit

The BSI central switching unit has to be configured as follows:
Select the vehicle
>3008<
Select the application
>Peugeot Planet 2000<
Special equipment
Additional heater retrofitted
Installation of the accessories additional heater
Confirm to continue
Additional heater retrofitted
Confirm to continue
1314514A_EN
Webasto AG
Postfach 80
D-82131 Stockdorf / Germany
National Hotline: 01805 93 22 78
(14 Cent aus dem deutschen Festnetz)
Hotfax: 0395 5592 353
Hotmail: hotline@webasto.de
http://www.webasto.de
Printed in Germany
Peugeot 3008
Feel the drive
01/2010 Printing: Stef-
fen