Trane Tracer CH530 User Manual page 13

CG-SVU02E-GB
DynaView Interface
Table 2 - Main screen menu, Chiller Operating Modes - Top Level
Chiller Level Mode
Top Level Mode
MP Resetting
MP Resetting Sub Modes
Chiller Level Mode
Top Level Mode
Stopped
Stopped Sub Modes
Local Stop
Immediate Stop
No Circuits Available
Diagnostic Shutdown - Manual Reset
Description
The main processor is going through reset.
Description
No Chiller Sub-Modes
Description
The chiller is not running either circuit, and cannot run without
intervention.
Description
The chiller is stopped by the DynaView Stop button
command- cannot be remotely overridden.
The chiller is stopped by the DynaView Immediate Stop
(by pressing the Stop then Immediate Stop buttons in
succession) - previous shutdown was manually commanded
to shutdown immediately.
The entire chiller is stopped by circuit diagnostics or lockouts
that may automatically clear.
The chiller is stopped by a diagnostic that requires manual
intervention to reset.
13