Setting Groups - GE B30 UR Series Instruction Manual

5 SETTINGS
SETTINGS
TRIP BUS 1 INPUT 1
= Off
TRIP BUS 1 INPUT 2
= Off
TRIP BUS 1 INPUT 16
= Off
SETTINGS
TRIP BUS 1
FUNCTION
= Enabled
TRIP BUS 1 BLOCK
= Off
SETTINGS
TRIP BUS 1
LATCHING
= Enabled
TRIP BUS 1 RESET
= Off
FLEXLOGIC OPERAND
RESET OP

PATH: SETTINGS CONTROL ELEMENTS
 SETTING GROUPS

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The setting groups menu controls the activation and deactivation of up to six possible groups of settings in the
settings menu. The faceplate Settings In Use LEDs indicate which active group (with a non-flashing energized
ELEMENTS
LED) is in service.
GE Multilin
Non-volatile,
set-dominant
OR
AND S
Latch
R
AND
OR
Figure 5–67: TRIP BUS LOGIC

SETTINGS GROUPS

SETTING GROUPS

FUNCTION: Disabled
SETTING GROUPS BLK:
Off
GROUP 2 ACTIVATE ON:
Off
GROUP 3 ACTIVATE ON:
Off
↓
GROUP 6 ACTIVATE ON:
Off
GROUP 1 NAME:
GROUP 2 NAME:
↓
GROUP 6 NAME:
SETTING GROUP
EVENTS: Disabled
B30 Bus Differential System
5.7 CONTROL ELEMENTS
SETTINGS
TRIP BUS 1 PICKUP
DELAY
TRIP BUS 1 RESET
DELAY
FLEXLOGIC OPERAND
T
PKP
TRIP BUS 1 OP
T
RST
FLEXLOGIC OPERAND
TRIP BUS 1 PKP
5.7.3 SETTING GROUPS
Range: Disabled, Enabled
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: FlexLogic operand
Range: up to 16 alphanumeric characters
Range: up to 16 alphanumeric characters
Range: up to 16 alphanumeric characters
Range: Disabled, Enabled
842023A1.CDR
5
GROUPED
5-155