Iec 61850 Goose Integers; Egd Protocol Status - GE B30 UR Series Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES STATUS
 IEC 61850
 GOOSE UINTEGERS
MESSAGE
MESSAGE
The B30 Bus Differential System is provided with optional IEC 61850 communications capability. This fea-
ture is specified as a software option at the time of ordering. Refer to the Ordering section of chapter 2 for
additional details.
The IEC 61850 GGIO5 integer input data points are displayed in this menu. The GGIO5 integer data values are received
via IEC 61850 GOOSE messages sent from other devices.
a) FAST EXCHANGE

PATH: ACTUAL VALUES STATUS
 FAST EXCHANGE 1

MESSAGE
These values provide information that may be useful for debugging an EGD network. The EGD signature and packet size
for the fast EGD exchange is displayed.
b) SLOW EXCHANGE

PATH: ACTUAL VALUES STATUS
 SLOW EXCHANGE 1

MESSAGE
These values provide information that may be useful for debugging an EGD network. The EGD signature and packet size
for the slow EGD exchanges are displayed.
GE Multilin

IEC 61850 GOOSE UINTEGERS
UINT INPUT 1
0
UINT INPUT 2
0
↓
UINT INPUT 16
0
 

EGD PROTOCOL STATUS

FAST EXCHANGE 1
SIGNATURE: 0
FAST EXCHANGE 1
DATA LENGTH: 0
 
EGD PROTOCOL STATUS
SLOW EXCHANGE 1
SIGNATURE: 0
SLOW EXCHANGE 1
DATA LENGTH: 0
B30 Bus Differential System

6.2.16 IEC 61850 GOOSE INTEGERS

6.2.17 EGD PROTOCOL STATUS

PRODUCER STATUS FAST EXCHANGE 1

PRODUCER STATUS SLOW EXCHANGE 1(2)
6.2 STATUS
6
6-9