Removing A Drive From Bay 1; Removing A Drive From Bay 2 - HP ProLiant DL585 User Manual

Removing a Universal Media Drive
To remove a universal media drive:
1. Power down the server. Refer to "Powering Down the Server" in Chapter 2,
"Server Operations."
2. Use the Torx T-15 tool to press the appropriate ejection button, and pull the
universal media drive out of the universal media bay. Refer to "Locating and
Removing the Torx T-15 Tool" in Chapter 2, "Server Operations."
Figure 4-11: Removing a drive from bay 1
HP ProLiant DL585 Server User Guide
Hardware Options Installation
4-15