Configuring User Priority; Checking The Configuration - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - Basic Configuration
Context
Configuring the non-authentication mode may cause security problems of the switch.
Do as follows on the switch that the user logs in to:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface [ ui-type ] first-ui-number [ last-ui-number ]
The user interface view is displayed.
Step 3 Run:
authentication-mode none
The non-authentication mode is configured.
----End

5.6.6 Configuring User Priority

You can configure the user priority.
Context
Refer to the Quidway S7700 Configuration Guide - Security.

5.6.7 Checking the Configuration

After configuring user management, you can view the usage information of user interfaces, local
user list, and online users.
Prerequisite
The configuration of User Management are complete.
Procedure
l
Issue 01 (2011-07-15)
CAUTION
NOTE
l If the authentication mode is non-authentication or password authentication, the priority of the user-
interface determines the command level that the users can access.
l If the authentication mode needs the username and the password, the priority of the user determines
the command level that the users can access.
Run the display users [ all ] command to check the user information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
74