Loading A Web; Creating A Web Account - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - Basic Configuration
Step 6 Run:
local-user user-name
The service type of an FTP login user is set.
Step 7 Run the following command in the cmd view of the PC:
ftp ip-address
The user name and password are displayed. The PC can log in to the S7700.
C:\>ftp 10.1.1.132
Connected to 10.1.1.132.
220 FTP service ready.
User (10.1.1.132:(none)): client
331 Password required for client.
Password:
230 User logged in.
ftp>
Step 8 Run the following command in the FTP view:
put local-filename
The web.zip file is uploaded from the PC to the S7700.
ftp> put web.zip
200 Port command okay.
150 Opening ASCII mode data connection for web.zip.
226 Transfer complete.
ftp: 251047 bytes sent in 3.36Seconds 74.74Kbytes/sec.
ftp>
----End
10.2.4 Loading a Web Page File
This section describes how to load a Web file.
Context
Before loading the Web page file, upload it to the S7700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
http server load file-name
The Web page file is loaded to the S7700.
----End

10.2.5 Creating a Web Account

Before logging in to the S7700 in Web mode, you need to create a Web account on the S7700.
Issue 01 (2011-07-15)
service-type ftp
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Web System Configuration
199