Quidway S7700 Smart Routing Switch
Configuration Guide - Basic Configuration
Figure 5-6 Selecting a terminal type
After the preceding steps are complete, press Enter. If the prompt <Quidway> is displayed, it
indicates that you have logged in to the S7700. At this time, you can enter the command to
configure and manage the S7700.
----End
5.3 Configuring Console User Interface
You can configure the console user interface so as to maintain a switch on the local device.
5.3.1 Establishing the Configuration Task
Before configuring a console interface, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
A console user interface is required for maintaining the local switch.
Pre-configuration Tasks
Before configuring a console interface, complete the following tasks:
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
59