Example For Running Commands In Batches; Example For Using The Tab Key - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - Basic Configuration

2.5.1 Example for Running Commands in Batches

This part provides an example for running commands in batches. In this example, by editing the
commands to be run in batches, you can configure the system to automatically run the commands
in batches.
Context
Log in to the switch and do as follows:
Procedure
Step 1 Edit the display users, display startup, and display clock commands to be run in batches.
<Quidway> batch-cmd edit
Info: Begin editing batch commands. Press CTRL+Z to abort this session.
display users
display startup
display clock
<Quidway>
Step 2 Run the commands in batches.
<Quidway> batch-cmd execute
<Quidway>batch-cmd execute command: display users
User-Intf
0
Username : Unspecified
<Quidway>batch-cmd execute command: display startup
MainBoard:
Configured startup system software:
Startup system software:
Next startup system software:
Startup saved-configuration file:
Next startup saved-configuration file:
Startup paf file:
Next startup paf file:
Startup license file:
Next startup license file:
Startup patch package:
Next startup patch package:
<Quidway>batch-cmd execute command: display clock
2009-11-23 14:27:20-08:00
Monday
Time Zone(China Standard Time) : UTC-08:00
<Quidway>batch-cmd execute finished.
----End

2.5.2 Example for Using the Tab Key

You can obtain prompts on keywords or check whether the entered keywords are correct by
pressing Tab.
Procedure
l
Issue 01 (2011-07-15)
Delay Type
CON 0 00:00:00
If only one keyword contains the incomplete keyword,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Network Address AuthenStatus
cfcard:/s7700v100r006c02b118.cc
cfcard:/s7700v100r006c02b118.cc
cfcard:/s7700v100r006c02b118.cc
cfcard:/vrpcfg.zip
cfcard:/vrpcfg.zip
default
default
default
default
NULL
NULL
2 CLI Overview
AuthorcmdFlag
26