Logging In To Switch - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - Basic Configuration
About This Chapter
Before configuring switches, you need to log in to the switch.
1.1 Introduction
You can log in to switches through console port or Telnet.
1.2 Logging In to the Device Through the Console Port
This section describes how to connect a terminal to a switch through the console port to establish
the configuration environment.
1.3 Logging In to Device Through Telnet
This section describes how to connect a terminal to a switch through Telnet to establish the
configuration environment.
1.4 Configuration Examples
This section provides examples for configuring users to log in to the switch through the console
port or Telnet together with the configuration flowchart. The configuration examples explain
networking requirements, configuration notes, and configuration roadmap.
Issue 01 (2011-07-15)
1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.

Logging In to Switch

1 Logging In to Switch
1