Configuring User Authentication - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - Basic Configuration
For more information about the command priority, see
Overview".
----End

5.3.5 Configuring User Authentication

The system provides three authentication modes, namely, AAA, password, and none.
Procedure
l
l
Issue 01 (2011-07-15)
Configuring AAA Authentication
1. Run:
system-view
The system view is displayed.
2. Run:
user-interface console interface-number
The console user interface view is displayed.
3. Run:
authentication-mode aaa
The authentication mode is set to AAA.
4. Run:
quit
Exit from the console user interface view.
5. Run:
aaa
The AAA view is displayed.
6. Run:
local-user user-name password { simple | cipher } password
Name and password of the local user are created.
Configuring Password Authentication
1. Run:
system-view
The system view is displayed.
2. Run:
user-interface console interface-number
The console user interface view is displayed.
3. Run:
authentication-mode password
You can set the authentication mode as password authentication.
4. Run:
set authentication password { cipher | simple } password
A password for authentication is set.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 User Management
"Command Level" in Chapter 3 "CLI
63