Danfoss TRONE-RF Installation Manual page 18

Installer Settings
Temperature
Limits
Frost Protect To help protect against damage to the heating
Temperature
Override
Daylight
Saving
Button Lock
Display Idle
Mode
18
This allows the upper and lower temperature of
the thermostat setting range to be limited.
Defaults:
Minimum 5°C,
Maximum 35°C
system caused by extreme low temperatures the
TPOne includes a Frost Protect level. This is the
minimum temperature level and is also used when
the TPOne is placed in standby mode.
Default: 5°C
This establishes the degree of manual temperature
override available to the user, No Limit, Limited +/-
2°C or No Override
Default: No Limit
Choose to set automatic daylight saving changes
on or off.
Default: On
Button lock can be set to avoid unintentional
setting changes. To activate buttons while button
lock is active the user must press the OK button
for 5 seconds.
Default: Off
When the TPOne is in idle mode the display can be
set to go off. The display will come on when any
button is pressed.
Default: On
(Continued)
TPOne-RF