Resetting All Custom Settings; Marking The Picture Files For Copyright Protection - Leica M Operating Instructions Manual

Saving profiles to a card / transferring profiles from a card
1. In the picture parameters menu (see p. 128/197), select
,
User Profile
2. select , and
Manage Profiles
3. select
Import profiles from card?
in the corresponding sub-menu.
• A confirmation prompt appears in the monitor.
4. Confirm your setting by pressing the
button, and confirm that you really want to import or export
the profile(s).
Note:
When exporting, all 4 profile slots are transferred to the card, i.e.
including any empty profiles. As a result, when importing profiles
any existing profiles in the camera will be overwritten, i.e. deleted.

RESETTING ALL CUSTOM SETTINGS

This function allows you to delete all previous custom settings in
the main and picture parameters menus at once, and reset them to
the factory default settings.
Setting the function
1. In the main menu (see p. 128/197) select
2. select or in the sub-menu.
No Yes
Note:
This reset also affects any stored individual user profiles defined.
or
Export profiles to card?
or
SET 17 INFO 27
, and
Reset

MARKING THE PICTURE FILES FOR COPYRIGHT PROTECTION

This camera enables you to mark your picture files by entering text
or other characters.
You can enter up to 17 characters of information under 2 headings
for each picture.
1. In the main menu (see p. 128/197), select
.
Copyright-Information
• A sub-menu containing the three options
Copyright-Information
the monitor. Only the
Copyright-Information
activated.
2. Turn on the
Copyright-Information
operation.
• The information lines are activated and the first position is
marked as ready for editing.
3. Use the setting dial to select the desired characters and
25
press the relevant direction on the direction pad
between positions.
You move to the lines either by pressing the appropriate
Artist
directions on the direction pad or using the
button.
The available characters include various punctuation marks,
the numbers from to , upper and lower case letters and a
0 9
space which appear in this order in an endless loop.
_
Confirm your setting by pressing the
, and appears in
Information Artist
line is initially
function and confirm the
26 to move
INFO 27 or SET
or button.
SET INFO
EN
17
163