Leica M Operating Instructions Manual page 155

5. Confirm the setting.
• The setting for
Automatic
6. Select the desired setting:
when the shutter is released once,
individually for each picture.
7. Confirm the setting.
• A set exposure series is indicated in the initial menu list by
/ .
XEV X
1
8. All pictures are produced by pressing the shutter release
button once or several times (see p. 125).
Example, the first " " stands for the graduation, the second for the number of
1
X
pictures
is marked as ready for editing.
to start bracketing automatically
On
to release the shutter
Off
Notes:
• The following rule applies when using automatic bracketing:
The sensitivity automatically determined by the camera for the
uncorrected picture is also used for all other pictures in a series,
i.e. this ISO value is not changed during a series. This may mean
that the slowest shutter speed specified under
is exceeded.
Maximum Exposure Time
• Depending on the initial shutter speed, the working range for
automatic bracketing may be limited.
• Regardless of this, the specified numbers of pictures are always
taken, which may mean that several pictures in a series have the
same exposure.
• Automatic bracketing is also possible when using flash. It is
implemented without regard to the state of charge of the flash
unit, meaning the series may contain shots both with and
without flash.
• The function remains active until it is deactivated again in the
sub-menu, i.e. even after the camera has
Number of Frames
been turned off and back on. If it is not deactivated, another
series of pictures is taken each time the shutter release button
is pressed.
EN
151