Before detaching parts, make sure the motor has stopped completely, then disconnect the Plug
from the outlet. (DISASSEMBLY: refer to page 6)
Note: Do not use benzene, thinner, alcohol, bleach, polishing powder or metal brush; otherwise the
surface will be damaged.
Do not put in the dishwasher.
Some discolouration of the Spinner, the Container Cover, the Pulp Container, the Juice Cup
Cover, the Blender Container Base, the Mill Container Base or the interior of the Container
Unit may occur upon usage.
Handle the Spinner, the Spout, the Blender Cutting Blades and the Mill Cutting Blades
carefully during cleaning. This may cause injury.
All parts must be cleaned immediately. Left-over food particles may cause unpleasant odours, stains or
malfunction of the appliance.
Note: Sponge and brush are not provided.
Wash both sides of the spinner filter mesh with a sponge under running water.
If necessary use a brush.
Wash each part in cold or lukewarm water with a soft sponge. Rinse and dry thoroughly before storing.
Wash carefully with a brush
under running water.
Remove food residue with a
brush. Do not use water.
Wash each part in cold or
warm water with a soft
Wash in cold or warm water with
a soft sponge. Rinse and dry