Table of Contents
Advertisement
Key Fob Arming
Press and hold the key fob button programmed for Arming or the Toggle
arm/disarm button. The Red LED two-second acknowledgement light
Key Fob Disarming
Press and hold the key fob button programmed for Disarming
or the Toggle arm/disarm button. The Green LED two-second
Area System Arming Operation
Area Assignment: Your security system has been set up into
separate areas. The number of areas and their names are listed on
the table in System Setup.
Arming the Area System
2. Select ARM to arm the system.
3. Enter your user code if required. The keypad displays
5a. Select YES for each area you want to arm.
5b. Select NO for each area you do not want to arm.
16
until the system is disarmed. See steps 7a through 7d.
7b. Select OKAY
7c. Select BYPASS
displayed.
Note:
7d. Select STOP to stop the system from arming. Correct
Your system may be programmed to require a user code
asks you to enter a user code.
system are armed.
Note: Your system may be pre-programmed at installation
for the Instant Arming option.
count down the number of seconds remaining for you to
The keypad displays INSTANT.
XR500/XR100 User Guide
Arming and Disarming
Advertisement
Table of Contents
