Digital Monitoring Products XR500N Operating Instructions Manual page 38

Output Group Assignment
10. Your system may by programmed to turn on an output group at
certain keypads when door access occurs.
User Menu Assignments
numbers assigned to their codes.
Adding User Profiles
2. Press any Select key. The keypad displays ADD DEL CHG.
3.
5. At the ARM/DIS AREAS: option, select the area numbers for
7.
8. The keypad displays each of the menus as shown in the
next menu Selection.
message for 4 seconds.
User Menu
Browser Feature
Refer to Appendix B in this guide for a diagram showing you how to
Changing User Profiles
1. Access the User Menu.
3. Press any Select key. The keypad displays ADD DEL CHG.
Note: The panel's authority check determines whether your
7. At the ARM/DIS AREAS: option, enter the area numbers for
8. The keypad displays ACCESS AREAS: . Enter the area
10. The keypad displays each of the menus as shown in the
message for 4 seconds, in
XR500/XR100 User Guide 31