Digital Monitoring Products XR500N Operating Instructions Manual page 42

next available user number is automatically selected and
automatically selected for the next user based on the
previous user entered. This batch entry method speeds up
user entry in large systems.
Browser Feature
Refer to Appendix B at the back of this guide for a diagram showing
you how to use the Add User Codes browser.
Changing User Codes
that has user code authority.
1. Access the User Menu.
3. Press any Select key. The keypad displays ADD DEL CHG
BAT.
4. Select CHG to change a user code.
5. At the USER NUMBER:
Refer to the System Setup section for the number of user codes
available for your system.
7. The display then shows the current user name. Press any top
row key to clear. See Entering Names in Appendix C to enter
a new name.
User Menu
- option, enter the user number to
Note: Changing a user code does not change the user number.
NUMBER: -. This display allows you to enter another user
number to change. Press the Back Arrow key twice to exit
the User Menu.
Changing Own User Code
Your system may be programmed at installation to allow users to
change their own user code.
1. Access the User Menu.
any Select key.
Select key.
4. Type your new user code. Press Command.
Browser Feature
Refer to Appendix B for diagrams showing you how to use the
Change User Codes browser.
XR500/XR100 User Guide 35