Hpe Storeonce 4900 Backup Disk Enclosure - HP StoreOnce 4900 Service And Maintenance Manual

Figure 15 Rear view of the HPE StoreOnce 4900 Backup server
1. RAID card 1
3. FC card 2
5. 10GbE card 1
7. Power supply 1
9. USB ports
11. iLO4 Management port (do not use for data
connection)
13. 1GbE network port 1 (used with Quick Install
option)

HPE StoreOnce 4900 Backup disk enclosure

Figure 16 Front view of the disk enclosure LEDs
1. Hard drive LEDs Normal mode (UID LED is solid)
36 LEDs on StoreOnce Backup systems
2. FC card 1
4. RAID card 2
6. 10GbE card 2
8. Power supply 2
10. Video/monitor port
12. Serial connector
14. 1GbE network ports 2, 3 and 4
Green = The drive is online, but is not currently active.
Flashing irregularly green = The drive is active and it is
operating normally.
Flashing green (1 Hz) = Do not remove the drive.
Removing the drive may terminate the current operation
and cause data loss. The drive is rebuilding, or it is part
of an array that is undergoing expansion, logical drive
extension, a stripe size migration, or RAID migration.