Viewing The Failed Disk In The Hardware Tree; Using The Storeonce Cli To Identify A Failed Disk - HP StoreOnce 4900 Service And Maintenance Manual

Viewing the failed disk in the Hardware tree

NOTE: The disks in a server unit are different from those in the expansion shelf. Be sure to
order the correct replacement disk.
The following example shows the Hardware tree expanded to show the disk failure in a disk
enclosure drawer.

Using the StoreOnce CLI to identify a failed disk

The following StoreOnce CLI commands can also be used to identify hardware problems and to
navigate the hardware tree for details about a specific component.
hardware show problems
hardware show status <Dev-id>
The following example illustrates how to use the StoreOnce CLI commands to find out more
about the disk failures we have identified on the StoreOnce GUI. .
1. To display warnings for all hardware components run the StoreOnce CLI command:
hardware show problems
This will assist you in identifying the storage cluster and component that is causing a problem.
2. To drill down to the hardware component causing the problem run the StoreOnce CLI
command, hardware show status <Dev-id> iteratively, where <Dev-id> is the
component with a DEGRADED status until the required component is displayed (it will have
a status of FAILED or MISSSING). For example::
# hardware show status
Name
--------------------
HPCZ230805V9
p1228 Storage System
p1228 Storage System
# hardware show status 051662fb-0000-1000-b027-53344a303131
Name
--------------------
p1228 Storage System
Enclosure
Pools
Controller 1
# hardware show status CZ3320E200
Dev-id
------------------------------------
33363437-3535-5A43-3233-303830355639
051662fb-0000-1000-b027-53344a303131
02abd2f6-0000-1000-b044-53344a30314d
Dev-id
------------------------------------
051662fb-0000-1000-b027-53344a303131
CZ3320E200
pools-1
5001438025A26200
Using the StoreOnce CLI to identify a failed disk
Status
--------
OK
DEGRADED
OK
Status
--------
DEGRADED
DEGRADED
OK
OK
13