Table 8 Hard disk LED sequences (continued)
Online Activity LED (green)
Flashing irregularly
Flashing irregularly
Off
Off
Off
1 Gbit ethernet port LEDs
The 1 Gbit ethernet LAN ports have two LEDs on the rear of the HPE StoreOnce Backup system.
Figure 21 1 Gbit ethernet LAN port LEDs
1. LAN network speed LED indicator
2. LAN activity status LED indicator
10 Gbit ethernet card LEDs
Each 10 Gbit ethernet card has two LEDs, as illustrated below.
Fault/UID LED (amber/blue)
Amber flashing regularly (1 Hz)
Off
Off
Amber flashing regularly
Off
Steady green: The LAN connection is using 10 Mbps/100
Mbps link.
Steady amber: The LAN connection is using a 1 Gbit
ethernet link.
Off: No connection.
Flashing green: Ongoing network data activity.
Off: No network data activity or no connection.
Interpretation
stripe size migration, or RAID
migration.
The drive is active, but a predictive
failure alert has been received for this
drive. Replace the drive as soon as
possible.
The drive is active and it is operating
normally.
A critical fault condition has been
identified for this drive and the
controller has placed it offline. Replace
the drive as soon as possible.
A predictive failure alert has been
received for this drive. Replace the
drive as soon as possible.
The drive is offline, a spare, or not
configured as part of an array.
1 Gbit ethernet port LEDs
43