(Usb Direct Print/Pictbridge); General Operation Procedure; Available Dsc; Print Settings Available From Dsc - Epson Stylus Photo RX585 Service Manual

EPSON Stylus Photo RX585/RX595/RX610
1.7.4 Camera Direct Print Function

(USB Direct Print/PictBridge)

Printing operations (selecting images to be printed, making print settings, starting/
canceling printing, and monitoring print process) can be carried out from a directly
connected DSC (Digital Still Camera) that conforms to the standard described below.

1.7.4.1 Available DSC

Table 1-29. Available DSC
USB Direct Print
DSCs conform to CIPA DC-001-2003 Digital Photo
DSCs conform to USB Direct Print
Solutions for Imaging Devices (DPS version 1.0) or
Protocol Revision 1.0.
the Rev. 2.0.

1.7.4.2 Print Settings Available from DSC

The following print settings can be made from the DSC. However, depending on the
DSC, some of the settings may not be available.
Table 1-30. Print Settings Available from DSC
Item USB Direct Print
How to specify
Single Sheet / DPOF specified
images
Plain Paper/ Glossy Photo / Prem.
Paper type
Glossy / Matte
Paper size 4x6, 5x7, 8x10*, Letter*, A4
Borderless, With Borders
Layout (2-up, 4-up, 8-up are available when
specified by DPOF)
Date
Quality
Auto Correct
Fit to Frame Available only for a single sheet
Print Image Framer Yes / No
The following operations are available; Getting the printer status, starting a print
Control of printer job or canceling it immediately or after printing the current page is finished. (In
the case of the USB Direct Print, resetting the printer is also available.)
Note * : Supported for EAI model only.
Product Description
PictBridge
PictBridge
Single Sheet / Multiple Sheet / DPOF
specified / XHTML-Print
Plain Paper/ Prem. Glossy
4x6, 5x7, 8x10*, Letter*, A4,
HiVision, CD label
Borderless, With Borderless,
2-up, 4-up, 8-up, 20-up, Index
On / Off
Draft / Normal / Photo
On / Off
Available
Not available
Specifications of Each Function

1.7.4.3 General Operation Procedure

Before connecting the DSC, check that the printer is in the
C H E C K
following status.
P O I N T
• No print job from a computer is processed or performed.
• Direct print from a memory card is not processed or performed.
• Stand alone copy using the scanner function is not operating.
• No paper out error or ink out error is occurring.
The DSC direct print procedure differs depending on the DSC specifications.The
following explains common procedure.
1. Setting on the printer
Before connecting a DSC with a USB cable, make the print settings such as paper
type/size, layout setting on the printer. This may not be required for some DSCs.
2. Setting on the DSC
Make the following settings on the DSC before connecting it to the printer. Some
DSCs may require to first connect to the printer for making the settings.
• When printing multiple images, specify images and number of copies using
the DPOF and Multiple Sheet* menus. The menus may not be available on
some DSCs.
Note*: The Multiple Sheet setting is available when using PictBridge.
• When printing a single image
<USB Direct Print>
Use the Single Sheet menu to specify an image and the number of copies.
The menu may not be available on some DSCs.
<PictBridge>
Specify an image and the number of copies. Specifying the number of
copies may not be available on some DSCs.
• Select the paper type/size, layout, and make the Fit to Frame setting if
necessary. These settings may not be available on some DSCs.
3. Starting to print
When the print settings on both the printer and the DSC is completed, follow the
procedure below to start printing.
1. Connect the printer and the DSC with a USB cable. Using a USB cable
included in the DSC package is recommended.
2. Operate the DSC to start printing.
3. Printing is carried out according to the settings made on the DSC. When some
print settings have not been made on the DSC, the corresponding settings
made on the printer are applied.
Revision B
27