Epson Stylus Photo RX585 Service Manual page 119

EPSON Stylus Photo RX585/RX595/RX610
LUBRICATION OF CARRIAGE ASSY AND CR GUIDE SHAFT
Lubrication CR Guide Shaft and
Area B: Apply 210 ± 20 mg of G-21
Points Carriage Assy
Type G-71
Area A:
210±20 mg (x2)
Amount of
Application
Area B:
210±20 mg (x2)
Applying
Injector
Tool
Make sure that the belt
and any parts other than
Precautions
those specified are free
from grease.
LUBRICATION AT INSTALLATION OF CARRIAGE ASSY
Lubrication Right and Left PG
Points Cams (Cam Contour)
Type G-71
Amount of
ø 1x One round
Application
Applying
Injector
Tool
Precautions
Maintenance
to the CR Guide Shaft in its
middle area.
Area A Area A
Area A: Inject 210 ± 20 mg of G-71
into the hole
Left side of Right side of
printer frame printer frame
G-71
G-71
CR Guide Shaft
Lubrication
(Grooves for pressure
Points
springs)
Type G-71
(1) ø 1x 5 mm (x2)
Amount of
(2) ø 1x 10 mm (x1)
Application
(3) ø 1x 15 mm (x1)
Applying
Injector
Tool
Precautions
LUBRICATION OF APG UNIT
Lubrication Upper part of the shaft
Points holders (5 points)
Type G-71
Amount of
ø 3x One round (x5)
Application
Applying
Injector
Tool
Disassemble the APG
Unit and apply grease
Precautions
before installing the
APG Unit.
Lubrication Around the Spur gear
Points 28.8
Type G-71
Amount of
ø 3x One round
Application
Applying
Injector
Tool
Apply grease before
Precautions installing the APG
Unit.
Overview
Revision B
Left side of Right side of
printer frame printer frame
G-71
G-71
Shaft holder
Lubrication point
G-71
G-71
2mm
119