Disassembly And Reassembly Procedure - Epson Stylus Photo RX585 Service Manual

EPSON Stylus Photo RX585/RX595/RX610

4.1.6 Disassembly and Reassembly Procedure

The flowchart below shows step-by-step disassembly procedure for Stylus Photo RX585/595/610. When disassembling each component, refer to the page indicated for the relevant
component.
Waste Ink Tray Assy
(p.69)
Disassembly and Assembly
START
Panel Assy
(p.63)
Scanner Unit
(p.65)
Main Board Assy / Scanner Housing
Case Open Sensor (p.77)
(p.66)
Middle Housing Assy
CIS Unit
(p.70)
(p.78)
Printhead
(p.73)
Printer Mechanism
* 1
(p.76)
Waste Ink Pads
(p.80)
Eject Frame Assy I/S Assy I/S Assy
(p.91) (p.84) (p.84)
ASF Assy
(p.85)
Upper Paper Guides
(p.92)
Paper Guide Front Assy Paper Guide Front Assy
(p.93) (p.93)
Flowchart 4-1. Disassembly Procedure
The color and shape of the printer illustrated in this manual may
C H E C K
differ from the final product.
P O I N T
CR Motor Unit
(p.79)
Linear Scale
* 2
(p.75)
Power Supply Board
(p.80)
APG Assy PF Scale and PF Encoder
(p.87)
Carriage Assy
(p.89)
Overview
* 1 For replacement of the Printer Mechanism Assy, install not only the
housings but also the following parts when installing the new Printer
Mechanism Assy.
• Intermediate Gear (26.5) (p.83)
• PF Encoder Scale (p.83)
• PF Motor (p.83)
• ASF Assy (p.85)
• Printhead (p.73)
• Head FFC Assy (p.91)
* 2 By using the special tool, the Printhead can be replaced without removing
the Middle Housing. (See p.73)
Stacker Assy
(p.81)
CR Motor
(p.83) (p.88)
PF Motor
(p.83)
Revision B
62