Middle Housing Assy - Epson Stylus Photo RX585 Service Manual

EPSON Stylus Photo RX585/RX595/RX610

4.2.5 Middle Housing Assy

After removing the Waste Ink Assy, take due care not to stain any
C A U T I O N
surrounding objects with waste ink.
1. Remove the Panel Assy (p.63)
2. Remove the Scanner Unit (p.65)
3. Remove the Main Board Assy / Case Open Sensor (p.66)
4. Remove the Waste Ink Tray Assy (p.69)
5. Remove the screw and remove the Hinge Assy (left and right).
6. Remove the screws (3 in the front and 2 in the rear) securing the Middle Housing
Assy.
7. Remove the Middle Housing Assy with care not to get any cable caught.
(Continued to next page)
Disassembly and Assembly
Hinge Assy B (Long): Left side
4
Figure 4-26. Removing the Middle Housing Assy
Removal of Exterior Parts
Hinge Assy B (Short): Right side
C.B.P-TITE 3x10 (x2)
·
Torque : 0.6±0.1N m
Figure 4-25. Removing the Hinge Assy
C.B.P-TITE 3x10 (x5)
Torque : 0.6±0.1N
3
Revision B
5
·
m
2
1
70