Tips On Using Transparencies; Tips On Using Envelopes - Lexmark C925 User Manual

Printing
•
Page orientation is important when printing on letterhead.
Source
Standard and optional trays (simplex printing)
Standard and optional trays (duplex printing)
Multipurpose feeder (simplex printing)
Multipurpose feeder (duplex printing)
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable
for laser/LED printers.

Tips on using transparencies

•
Print samples on the transparencies being considered for use before buying large quantities.
•
Feed transparencies from the standard tray or from the multipurpose feeder.
•
From the Paper menu, set the Paper Type to Transparency.
• Use transparencies designed specifically for laser/LED printers. Transparencies must be able to withstand
temperatures of 230°C (446°F) without melting, discoloring, offsetting, or releasing hazardous emissions.
•
To prevent print quality problems, avoid getting fingerprints on the transparencies.
•
Before loading transparencies, flex the stack to prevent sheets from sticking together.
• We recommend Lexmark transparencies. For ordering information, see the Lexmark Web site at
www.lexmark.com.

Tips on using envelopes

Print samples on the envelopes being considered for use before buying large quantities.
• Use envelopes designed specifically for laser/LED printers. Check with the manufacturer or vendor to ensure that
the envelopes can withstand temperatures up to 220°C (446°F) without sealing, wrinkling, curling excessively, or
releasing hazardous emissions.
•
For best performance, use envelopes made from 90 g/m
must not exceed 70 g/m
•
Use only new envelopes from undamaged packages.
• To optimize performance and minimize jams, do not use envelopes that:
– Have excessive curl or twist
–
Are stuck together or damaged in any way
2
(20 lb bond) weight.
Print side
Preprinted letterhead
design is placed faceup.
Preprinted letterhead
design is placed facedown.
Preprinted letterhead
design is placed facedown.
Preprinted letterhead
design is placed faceup.
2
(24 lb bond) paper or 25% cotton. All‑cotton envelopes
Paper orientation
When feeding short edge, the top
edge of the sheet with the logo is
placed at the right side of the tray.
When feeding long‑edge, the
letter head should go to the rear
of the printer.
The top edge of the sheet with the
logo is placed at the right side of
the tray.
The top edge of the sheet with the
logo should enter the
multipurpose feeder first.
The top edge of the sheet with the
logo should enter the
multipurpose feeder last.
82