Lexmark C925 User Manual page 123

Understanding the printer menus
Menu item
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border
None
Solid
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Manual Feeder
Description
Specifies the orientation of a multiple‑page document
Notes:
•
Auto is the factory default setting. The printer chooses between portrait and
landscape.
• This setting applies if Paper Saver in this menu is not set to Off.
Specifies that multiple‑page images be printed on one side of a paper
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Prints a border around each page image when using Paper Saver
Notes:
•
None is the factory default setting.
• This setting applies if Paper Saver in this menu is not set to Off.
Specifies the positioning of multiple‑page images when using Paper Saver
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
•
This setting applies if Paper Saver in this menu is not set to Off.
Specifies whether blank separator sheets are inserted
Notes:
• Off is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to On. If Collate is set to Off, then a blank page is inserted
between each set of printed pages, such as after all page 1's and after all page
2's.
•
Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of the print job. This
setting is useful when printing transparencies or when inserting blank pages in
a document.
Specifies the paper source for separator sheets
Notes:
•
Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, Configure MP must be set to Cassette in order for
Manual Feeder to appear as a menu setting.
123