Nd Filter - Canon EOS C500 Mark II Instruction Manual

Hide thumbs Also See for EOS C500 Mark II:
Table of Contents

Advertisement

ND Filter

In CAMERA mode, using the ND filter allows you to open up the aperture to obtain a shallower depth of field
even when recording in bright surroundings. You can also use the ND filter to avoid the soft focus caused by
diffraction when using small apertures. By default, you can select one of 3 density levels (up to 6 stops in 2-stop
intervals). If you enable the extended ND range, you can select one of 5 density levels (up to 10 stops in 2-stop
intervals).
You can also perform this function remotely using Browser Remote on a connected network device (A 172,
175).
Press the ND FILTER + or
setting.
• Repeatedly pressing ND FILTER + button will change the ND filter
setting in the following order: [ND 2 stops]
stops]
[ND 8 stops]*
FILTER
button cycles through the settings in reverse order.)
• The selected ND filter setting will appear at the bottom of the
screen.
v
* Only when
> [
Camera Setup] > [Extended ND Range] is set to [On].
NOTES
NOTES
• If you set an assignable button to [ND +] or [ND –] (A 119), you can press the button to change the ND filter
setting.
• Depending on the scene, the color may change slightly when turning the ND filter on/off. Setting a custom
white balance (A 76) may be effective in such case.
• About the extended ND range: When you switch to or from a density level in the extended range (8 or 10 stops),
you may notice one or both of the following circumstances.
- The focus may shift, affecting also the indication on the lens's focus distance scale.
- Depending on the lens, the camera may not be able to focus at infinity focus.
• Changing the ND filter setting using the optional RC-V100 Remote Controller:
- When the remote controller is connected to the camera, you can use the remote controller's ND button in
the same way as the camera's ND FILTER + button.
- For settings between 2 and 8 stops, the corresponding ND filter indicator (1 to 4, respectively) will illuminate
in orange. When the ND filter is set to 10 stops, indicators 1 and 4 will both illuminate.
button to select the desired ND filter
[ND 4 stops]
[ND 10 stops]*
ND filter off. (The ND
[ND 6
ND Filter
71

Advertisement

Table of Contents
loading

Table of Contents