Siemens PCS 7 Installation Manual page 95

Overview of additional devices and drivers
Multi-monitor interfaces
Device
Multi-monitor graphics card
Connect monitors via internal inter‐
faces
PC station on redundant network
Driver
Network adapters
Time signal via DCF77
Driver
Time reception service
Acoustic or visual signal generator
Driver
Horn module
Acoustic signal generator
Driver
Sound card
Smart cards
Driver
Smart card reader
PCS 7 - PC Configuration (V8.2)
Installation Manual, 03/2016, A5E36200050-AB
Additional information
Section "Multi-monitor graphics cards in PC Stations (Page 96)"
Up to a maximum of 4 monitors on a PC.
You can connect one monitor to one port.
Up to a maximum of 2 monitors on a PC.
Additional information
● Redundant, fault-tolerant terminal bus based on the Parallel Redundancy Protocol
(PRP)
● Redundant, fault-tolerant terminal bus based on the INTEL TEAM mode
● Redundant, fault tolerant system bus based on the modular switches of the
SCALANCE series
● Redundant, fault tolerant system bus with AS 410H
Documentation Process Control System PCS 7; Fault-tolerant Process Control Sys‐
tems
Additional information
Section "How to activate the DCF77 reception service (Page 97)"
Process Control System PCS 7; Time synchronization
Documentation
Additional information
The required drivers are automatically installed with PCS 7.
Process Control System PCS 7; Operator Station
Documentation
Additional information
Installation medium for the sound card or Windows standard;
Section "Assigning the driver to the sound card (Page 97)"
Additional information
WinCC Information System ;
Information on the suitable smart card reader and the required driver is available in
Process Control System PCS 7; PCS 7 Readme file (see "Preface (Page 9)") .
the
Installing PC stations
5.5 Installation of drivers for PCS 7
95